Checking The Printer; Loading Paper - Epson Stylus Photo 1270 Setup Manual

Checking the Printer

Before printing your first page, you need to make sure the printer is working
correctly by printing a nozzle check page and, if necessary, cleaning the
print head.

Loading paper

Follow these steps to load plain paper in the printer.
1. Lower the output tray and slide out the extension. Next, slide the left
edge guide so that the distance between the edge guides is slightly
wider than the width of your paper.
edge guide
2. Fan a stack of paper, then tap it on a flat surface to even the edges.
3. Load the stack of paper with the printable side up and the right edge of
the paper resting against the right side of the sheet feeder. Then slide
the left edge guide against the left edge of the paper.
printable
side up
Note:
Always load paper into the sheet feeder short edge first.
Make sure the paper stack fits under the arrow mark inside the edge guide.
output tray