Pioneer AVG-VDP1 Installation Manual page 15

Vehicle dynamics processor
Hide thumbs Also See for AVG-VDP1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
When installing the antenna outside the vehicle (on the body)
Put the GPS antenna in a position as level as possible, such as on the roof or trunk lid. (The
GPS antenna is fastened with a magnet.)
GPS antenna
When routing the lead in from inside the trunk
Clamps
Use clamps to secure the
lead where necessary
inside the vehicle.
Rubber packing
When routing the lead in from the top of the
door
Make a U-shaped loop in the lead
on the outside to prevent rainwater
from flowing along the lead into
the interior of the vehicle.
Clamps
Use clamps to secure
the lead where nec-
essary inside the
vehicle.
Waterproof pad
Make sure the waterproof
pad contacts the top of the
rubber packing.
Make a U-shaped loop in the
lead outside the rubber pack-
ing to prevent rainwater from
flowing along the lead into
the interior of the vehicle.
14

Advertisement

Table of Contents
loading

Table of Contents