Download Print this page
Dell Force10 S-Series Specifications

Dell Force10 S-Series Specifications

S25v and s50v s-series power-over-ethernet switches

Advertisement

Quick Links

Dell Force10 S-Series
S25V and S50V Power-over-Ethernet Switches
Modular Dell Force10 Operating System (FTOS) software delivers inherent stability; 24-port and
48-port GbE fixed configuration 1-RU switch with up to four 10 GbE ports; scalable stacking
technology supports 384 GbE ports with up to eight S50Vs.
S-Series High Performance GbE/10 GbE Switch
The Dell Force10 S25V and S50V bring core-like resiliency in
a compact form factor to the network edge, enabling cost-
effective scalability. These high performance and low latency
Gigabit Ethernet switches deliver the critical functionality that
advanced enterprise network edges demand.
Key applications
Coupled with the Dell Force10 E-Series and C-Series, which
deliver unmatched resiliency and performance, the S25V
and S50V enable IT managers to deploy a reliable end-to-
end 10 GbE solution that spans from core to network edge.
• Line-rate GbE edge switches with 10 GbE uplinks
for converged services and high bandwidth
desktop applications
• Cost-effective PoE-enabled 10/100/1000Base-T wiring
closet aggregation of VoIP phones, wireless access points,
video cameras or other IEEE 802.3af-compliant devices
Key features
The S25V and S50V are fixed configuration switches with
PoE that deliver the reliability and scalability that wiring
closets demand.
• 24 or 48 10/100/1000 ports in a 1-RU form factor
– 20 or 44 ports 10/100/1000Base-T
– 4 ports 10/100/1000Base-T shared with SFP ports
– IEEE802.3af compliant PoE that provides up to 15.4 W
per port and 790 W per switch
• Optional modules
– 2-port 10 GbE LAN PHY (pluggable XFP modules)
– 2-port 10 GbE (CX4)
– 2-port 12 Gbps stacking
– 1-port 24 Gbps stacking
• Modular Dell Force10 FTOS with advanced monitoring
and serviceability functions
• Suite of security, access control and wiring closet edge
features for enterprise networks
• PowerSmart
suite of intelligent power management
features provide automatic sensing, provisioning and
management of PoE power
• Full complement of standards-based Layer 2, IPv4 and
IPv6 features for unicast and multicast applications
• Switching fabric capacity of up to 288 Gbps and
forwarding capacity of more than 131 Mpps
• Stack up to eight S25N, S25P, S25V, S50N or S50V
switches to deliver a scalable and flexible high
capacity solution
High performance,
low latency Layer 2
Gigabit switching for
powering the data
center edge

Advertisement

loading

Summary of Contents for Dell Force10 S-Series

  • Page 1 Dell Force10 S-Series S25V and S50V Power-over-Ethernet Switches Modular Dell Force10 Operating System (FTOS) software delivers inherent stability; 24-port and 48-port GbE fixed configuration 1-RU switch with up to four 10 GbE ports; scalable stacking technology supports 384 GbE ports with up to eight S50Vs.
  • Page 2: Regulatory Compliance

    PowerSmart, P-Series, S-Series, TeraScale, TransAccess, VirtualScale, and VirtualView are trademarks of Dell Inc. All other company names are trademarks of their respective holders. Information in this document is subject to change without notice. Dell Inc. assumes no responsibility for any errors that may appear in this document.

This manual is also suitable for:

Force10S25-01-ge-24vS50-01-ge-48t-v-2S50-01-10ge-2pS50-01-10ge-2cS50-01-12g-2s ... Show all