To Delete The Greeting; To Record A Paging Message; To Delete A Paging Message; Date/Time Display - LG Nortel GDC-400 User Manual

7.Key System Functions

7.21.5 To delete the greeting

1) Press TALK (
2) Press PROGRAM (
3) Press .

7.21.6 To record a paging message

1) Press TALK (
2) Press PROGRAM (
3) Press .
4) Press # to start recording.
5) Press PROGRAM (
Caution
This feature should be programmed at the admin station before using.

7.21.7 To delete a paging message

1) Press TALK (
2) Press PROGRAM (
3) Press .

7.22 Date/Time Display

* This feature is not available in ipLDK-24/100/300/300E.
A current date and time will be displayed as;
1) Press TALK (
2) Press PROGRAM (
3) Press .

7.23 Linked Station Pairs

Two stations can be linked with each other by programming. When two stations are linked, the
following functions are supported;
1) When a station is busy, the other idle linked station will not receive ring for CO lines,
transferred ring or ICM calls.
2) If one of two linked stations receives ICM/DISA/DID calls, then the other linked station
will receive ring together.
3) If any one station in a linked pair goes to DND state or pre-selected message display
state, then the other goes to the same state automatically. Also, if any one station in a
linked pair comes out of these states, then the other becomes to come out.
4) If one of two linked station is busy, the LCD of the other station will display "IN USE AT
LINK".
5) If you have set DND function, you should be sure that the wireless terminal be in DND
state by pressing TALK (
system sends setting information related to message of the wireless terminal about
every 3 minute, you should wait about 3 minutes. When you canceled DND function, you
should be sure that the wireless terminal be not in DND state by pressing TALK (
button after canceling DND function for the same reason, too.
) button.
) button longer than 1 second.
) button.
) button longer than 1 second.
) button longer than 1 second or END (
) button.
) button longer than 1 second.
) button.
) button longer than 1 second.
) button after setting DND function. Otherwise, because the
58
) button.
)