GE JTP90BM Dimensions And Installation Information

20''
CABINET
WIDTH
30''
JTP90BM/CM/WM
CUTOUT DEPTH
CUTOUT
WIDTH
GE 30" Built-In Double Microwave/Thermal Wall Oven
®
28-1/2'' MIN.
28-5/8'' MAX.
Dimensions and Installation Information (in inches)
A
C
KW Rating
CONDUIT
(72'' LONG)
240V 6.4
CUTOUT
HEIGHT
208V
5.6
42-3/16'' MIN.
42-1/4'' MAX.
Breaker Size
240V
30 Amps
E
208V
30 Amps
Note: Cabinets installed adjacent to wall
ovens must have an adhesion spec of at B
least a 194°F temperature rating.
Minimum
cutout location
D
Installation Information: Before installing,
21-5/8''
from the floor
consult installation instructions packed with
product for current dimensional data.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
For answers to your Monogram,
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
23-1/2'' MIN.
JUNCTION BOX
LOCATION
28''
Suitable
bracing
to support
runners
(must support 275 lbs.)
Cabinet
A – Overlap of oven over side of edges of cutout
B – Overlap of oven at top and bottom of cutout
C – Overall of oven at top of cutout
Oven
D – Overall depth*
E – Overall height with trim
Overall height without trim
E – Overall width
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.
® GE Profile ™ or
service,
®
C L
2 x 4 or
equivalent
runners
21-5/8"
over centerline
of cabinet
30"
11/16"
1"
1/2"
21" Minimum
23-1/2" Door Allowance
44"
43-1/2"
29-3/4"
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
A
F
E
DOOR MUST BE
REMOVED BEFORE
INSTALLATION
D
21''
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
Specification Revised 9/07
20''
CABINET
WIDTH
30''
CUTOUT DEPTH
CUTOUT
23-1/2'' MIN.
WIDTH
28-1/2'' MIN.
28-5/8'' MAX.
JUNCTION BOX
LOCATION
A
C
CONDUIT
(72'' LONG)
CUTOUT
HEIGHT
42-3/16'' MIN.
28''
42-1/4'' MAX.
B
Minimum
cutout location
21-5/8''
from the floor
Listed by
Underwriters
Laboratories
320140
to
Ca
Ov
*D
26