Socket CHS 8Ci Quick Start Manual page 10

APPLE - BLUETOOTH MODE HID
Connect your CHS with an Apple device using HID mode.
(HID is the default mode.)
1. Power on the CHS.
Scan this barcode to set the CHS to HID mode.
2.
3. Enable Bluetooth on the Apple device. A Bluetooth device search
will begin.
Select Socket CHS in the list of found devices.
4.
Tap Pair if prompted.
5.
6. The CHS will beep once to confirm connection.
Now you are ready to scan barcodes in HID mode using your Apple
device!
10
(KEYBOARD EMULATION)