Configuration And Operation On The Telephone; Symbols And Acknowledgement Tones - AVM FRITZ!Box 6320 Cable Installation, Configuration And Operation

Configuration and Operation on the Telephone

14 Configuration and Operation on the Telephone
Many of the FRITZ!Box functions and features can be configured and
used over telephones connected to the FRITZ!Box. Only tone-dialing
(dual-tone multifrequency = DTMF) telephones can be used in config-
uration and operation.
14.1

Symbols and Acknowledgement Tones

Symbols for Actions on the Telephone
Icon
M
N
O
P
D
Q
K
<DNo.>
Acknowledgement Tones
•
•
Action
Dial a number.
Pick up the handset.
Hang up the handset.
Talk.
Three-party conference call
Wait for the acknowledgement tone.
You hear the ring tone.
In place of <DNo>, enter the destination number.
The destination number is the complete telephone
number of an external telephone line.
A correct entry will be signaled by the positive acknowl-
edgement tone. The tone is 1 second in length and
sounds once.
If the entry is incorrect, you will hear the negative ac-
knowledgement tone. This is a repeated tone 0.25 sec-
onds in length.
92