Registering Cordless (Dect) Telephones - AVM FRITZ!Box 6320 Cable Installation, Configuration And Operation

Registering Cordless (DECT) Telephones

4.2 Registering Cordless (DECT) Telephones
Up to six cordless telephones can be registered on the
FRITZ!Box. The cordless telephones must support the DECT
standard.
The DECT function of the FRITZ!Box is switched on automati-
cally when the first cordless telephone is registered.
Registering Cordless Telephones from AVM
The cordless telephones FRITZ!Fon MT-F, FRITZ!Fon C3, and
FRITZ!Fon MT-D from AVM are the ideal complement to your
FRITZ!Box 6320 Cable.
Here is how to register your FRITZ!Fon on the FRITZ!Box:
1.
2.
Your FRITZ!Fon is now connected with the FRITZ!Box.
If registration fails, register the FRITZ!Fon manually. See the
manual of your FRITZ!Fon for instructions.
Registering Cordless (DECT) Telephones from Other
Manufacturers
1.
2.
If the FRITZ!Fon is switched off, switch it on by pressing
and holding down the hang up/end call button.
Press the "DECT" button on your FRITZ!Box. Hold the but-
ton down until the DECT LED on the FRITZ!Box flashes.
This takes about 10 seconds.
Start the process of manually registering your cordless
telephone at a base station. See the manual of your
cordless telephone for instructions.
Follow the directions on the display of the cordless tele-
phone.
Upon delivery the system PIN of the FRITZ!Box is set to
"0000".
As soon as you are prompted to press the registration
button (also the paging button) on the base station,
press the "DECT" button on the FRITZ!Box and hold it
down until the DECT LED on the FRITZ!Box begins flash-
ing. This takes about 10 seconds.
17