Preparation; Attaching The Base - NEC E654 User Manual

Preparation

IMPORTANT: Do not apply pressure to the screen display area which may
compromise the integrity of the display� The manufacturer's warranty does not
cover user abuse or improper installations�

Attaching the Base

E654
E554/E464/E424
E324
Neck Screw x 4
E324: M4 (12 mm)
1� Place the display face down on a soft and flat surface to prevent
scratching and damage�
2� Carefully align the base to the stand and fasten the screws with a cross-
head screwdriver�
CAUTION:
The base of the stand is very heavy� Install with care to avoid injury such as dropping
the base onto one's foot�
Stand Screw x 4
E654: M6 (16 mm)
Stand Screw x 4
E554/E464/E424: M4 (10 mm)
Stand Screw x 4
E324: M4 (8 mm)
English-11