Advertisement
Available languages
Available languages
97859 Instructions.quark
CONNECTING YOUR MOUSE
CAUTION: Always turn off your computer before connecting or disconnecting
your mouse. To connect your mouse, plug the PS/2 connector
into your computer's PS/2 port.
INSTALLING YOUR iWHEELWORKS SOFTWARE
In order to take full advantage of your mouse, you must install the enclosed
software. While your input device will work as a basic mouse once it is plugged
in, the software must be loaded to use the programmable features.
To install from Windows® 95/98/Me/NT/2000:
1. Insert the Mouse SETUP DISK into your floppy disk drive.
2. Click the Start button and then click Run.
3. Now type <drive>:\ setup. For example, if the Mouse SETUP DISK is in
drive A, type: a:\ setup
4. Now click OK . (Follow the on-screen instructions.)
NOTE: If you do not restart your computer, the software will not operate.
5. Once restarted, the mouse icon 8 should appear in the Windows® system
tray. Double click the icon to bring up your mouse control panel.
CUSTOMIZING YOURMOUSE
From the mouse control panel, you can customize your mouse to meet your indi-
vidual needs! Just click on the appropriate tab to adjust settings:
2/26/02
1:28 PM
Page 3
1
PS/2
Mouse Port:
Advertisement
