Bluetooth Mode Operations - Kenwood KDC-X597 Instruction Manual

Bluetooth mobile phone
Receive a call
Reject an incoming
call
End a call
Switch between
hands-free and
private talk modes
Adjust the phone
volume
Switch between two
connected phones
Press~ or the volume knob or one of the number
buttons
(1
to
6)
(or~ on RC-406).
• The~ button illuminates and flashes in green
(for
13•11U1W/ l:oXtll:i,..,..,.111)
or flashes in red
(for
13•Itll:ii~.,.11J)
when there is an incoming call.
During a call, the button illuminates in red.
• When [AUTO ANSWER] is set to the selected time, the
unit answers incoming call automatically.(-+ 12)
Press~
SRC (or.-- on RC-406).
Press~ or~ SRC (or.-- on RC-406).
Press 6 ..,.II during a call.
• Operations may vary according to the connected
Bluetooth device.
Turn the volume knob during a call.
Phone volume: [00]
to
[35] (Default: [15])
• This adjustment will not affect the volume of the
other sources.
1 Press~ to enter Bluetooth mode.
2 Press and hold~ to switch between the two
connected phones ([MAIN]/ [SUB]).
When the phone receives a text message, the unit rings and "SMS RECEIVED" or
"NEW SMS" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
BLUETOOTH•
1
Press~
to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat step 2 until the desired item is selected.
• To return to the previous hierarchy,
press~.
• To cancel, press~.
PHONE BOOK
CALL HISTORY/
HISTORY
NUMBER DIAL
OJ
Turn the volume knob to select a name, then press the knob.
[l]
Turn the volume knob to select a phone number, then press the knob to call.
• To return to the previous hierarchy,
press~.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. lfthe phone does not
support PBAP, "NO DATA" appears. Transfer the phonebook manually.
(-+ 12, TRANSFER PB)
• Contacts are categorized as: GE (general), HM (home), OF (office), MO (mobile),
OT (others).
• This unit can display only non-accent letters. (Accent letters such as
"U"
is
showns as "U".)
• lfthe phonebook contains many contacts, use Alphabet Search. (-+12)
OJ
Turn the volume knob to select a name or a phone number.
• "I" indicates call received, "0" indicates call made, "M" indicates call missed.
• Press SCRL DISP to change the display information (name or phone
number).
• "NO DATA" appears ifthere is no recorded call history.
[l]
Press the volume knob to call.
OJ
Turn the volume knob to select a number (0 to 9) or character(*,#,+).
[l]
Press~ I~
to move the entry position.
Repeat steps
OJ
and [l] until you finish entering the phone number.
W
Press the volume knob to call.
(or using RC-406)
OJ
Press the number buttons
(0
to
9)
to enter the phone number.
[l]
Press~ to call.
DVC PRIORITY/
MAIN-XXX/ SUB-XXX: To view which device is connected as MAIN and which is
DVC PRI connected as SUB.
ENGLISH
I
11