Adjusting The Clutch Lever Free Play - Yamaha WR250R Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
G
Ride at moderate speeds after
changing a tire since the tire sur-
face must first be "broken in" for it
to develop its optimal characteris-
tics.
6
Adjusting the clutch lever free
play
2
1
1. Clutch lever free play
2. Locknut (clutch lever)
3. Clutch lever free play adjusting bolt
4. Rubber cover
The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.
1. Slide the rubber cover back at the
clutch lever.
2. Loosen the locknut.
3. To increase the clutch lever free
play, turn the clutch lever free play
adjusting bolt in direction (a). To
6-21
EAU48372 decrease the clutch lever free play,
turn the adjusting bolt in direction
(b).
TIP
3 4
If the specified clutch lever free play
could be obtained as described above,
(a)
skip steps 4–7.
4. Fully turn the adjusting bolt in di-
(b) rection (a) to loosen the clutch ca-
ble.
5. Slide the rubber cover back further
down the clutch cable, and then
loosen the locknut.
1. Locknut (clutch cable)
2. Clutch lever free play adjusting nut (clutch
cable)
3. Rubber cover
2 3
(a)
(b)
1