Yamaha WR450F(R) Owner's Service Manual page 592

Hide thumbs Also See for WR450F(R):

Table of Contents

Start switch 1

Master cylinder 2

Master cylinder bracket 3

Bolt (master cylinder bracket) 4

The start switch and master cylinder bracket

should be installed according to the dimen-

sions shown.

Install the bracket so that the arrow mark a

faces upward.

First tighten the bolt on the upper side of the

master cylinder bracket, and then tighten the

bolt on the lower side.

Lights switch 1

10. Install:

"ENGINE STOP" button 1

Clutch lever holder 2

Bolt (clutch lever holder) 3

Hot starter lever holder 4

Bolt (hot starter lever holder) 5

The "ENGINE STOP" button, clutch lever

holder and clamp should be installed accord-

ing to the dimensions shown.

Pass the "ENGINE STOP" button lead in the

middle of the clutch lever holder.

9 Nm (0.9 m · kg, 6.5 ft · lb)

2 Nm (0.2 m · kg, 1.4 ft · lb)

4 Nm (0.4 m · kg, 2.9 ft · lb)

Show Quick Links

Table of Contents