Yamaha WR450F(R) Owner's Service Manual page 168

1 Starter motor lead
2 Negative battery lead
3 Wire harness
4 Clamp
5 Taillight lead
6 Coolant reservoir tank
breather hose
7 Coolant reservoir hose
8 Positive battery lead
9 Starting circuit cut-off
relay
0 Battery
CABLE ROUTING DIAGRAM
Å Position the starter motor lead,
negative battery lead and wire
harness in the tank damper slit.
ı Fasten the wire harness to the
frame with a plastic locking tie and
cut off the tie end.
Ç Do not allow the taillight lead to
slacken.
Î Pass the starter motor lead and
negative battery lead over the car-
buretor.
‰ Fasten the coolant reservoir tank
breather hose, coolant reservoir
hose and rectifier/regulator lead to
the frame with a plastic band.
2 - 27
SPEC
Ï Fasten the coolant reservoir tank
breather hose and coolant reser-
voir hose to the frame with a plas-
tic band.
Ì Pass the coolant reservoir hose
on the outside of the coolant res-
ervoir tank breather hose.