Yamaha YZ250F(V) Owner's Service Manual page 296

1
1
1
1
2
2
1
2
2
4 - 21
CARBURETOR
3. Install:
• Hot starter plunger 1
2 Nm (0.2 m · kg, 1.4 ft · lb)
4. Tighten:
• Bolt (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
• Bolt (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
5. Install:
• Throttle cable (pull) 1
4 Nm (0.4 m · kg, 2.9 ft · lb)
• Throttle cable (return) 2
11 Nm (1.1 m · kg, 8.0 ft · lb)
6. Adjust:
• Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
7. Install:
• Throttle cable cover 1
• Bolt (throttle cable cover) 2
4 Nm (0.4 m · kg, 2.9 ft · lb)
8. Install:
• Throttle position sensor lead coupler 1
• Clamp 2
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
ENG