Yamaha SUPER TENERE XT1200Z Owner's Manual page 42

INSTRUMENT AND CONTROL FUNCTIONS
4. Insert the projection on the rear of
the rider seat into seat holder A as
shown.
1
3
1. Projection
2. Seat holder A (for low position)
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
3-25.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
2
1. Rider seat height position adjuster
3. Install the rider seat height position
adjuster so that the match mark is
aligned with the "H" mark as
shown.
1
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
1
3
2
3-27
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
1
2
1. Projection
2. Seat holder B (for high position)
TIP
Make sure that the rider seat is properly
secured before riding.