Catalytic Converter; Rider Seat - Yamaha SUPER TENERE XT1200Z Owner's Manual

Hide thumbs Also See for SUPER TENERE XT1200Z:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
3
burns:
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13433
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10862
pairable damage to the catalytic
converter.
ECA10701

Rider seat

To remove the rider seat
1. Insert the key into the seat lock,
1. Unlock.
2. Seat lock
2. Lift the front of the rider seat and
To install the rider seat
1. Insert the projection on the rear of
3-25
and then turn it counterclockwise.
2
1
push the seat forward.
the rider seat into the seat holder
as shown, and then push the front
of the seat down to lock it in place.
EAU49443

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents