Yamaha SUPER TENERE XT1200Z Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
To switch between the instantaneous
fuel consumption displays, push the
right button when one of the displays is
shown.
TIP
The instantaneous fuel consumption
displays when the vehicle speed reach-
es 20 km/h (12 mi/h).
3
Average fuel consumption mode
2
1. Average fuel consumption display
2. Right set button
The average fuel consumption display
modes "AVE_ _._ km/L", "AVE_ _._
L/100 km" or "AVE_ _._ MPG" (for the
UK only) show the average fuel con-
sumption since the display was last re-
set.
●
The "AVE_ _._ km/L" display
shows the average distance that
can be traveled on 1.0 L of fuel.
● The "AVE_ _._ L/100 km" display
shows the average amount of fuel
necessary to travel 100 km.
●
For the UK only: The "AVE_ _._
MPG" display shows the average
distance that can be traveled on
1.0 Imp.gal of fuel.
To switch between the average fuel
consumption displays, push the right
1
button when one of the displays is
shown.
To reset the average fuel consumption
display, select it by pushing the right
button, and then push the right button
for at least one second while the dis-
play is flashing.
TIP
After the display is reset, the average
fuel consumption is not displayed until
the vehicle has traveled 1 km (0.6 mi).
3-13
Drive mode display
1. Drive mode display
This display indicates which drive
mode has been selected: Touring
mode "T" or sports mode "S". For more
details on the modes and on how to se-
lect them, refer to pages 3-15 and 3-17.
1