Yamaha YZ250F(S) Owner's Service Manual page 466

Table of Contents

Advertisement

FRONT WHEEL AND REAR WHEEL
5 - 7
9. Install:
Brake hose cover 1
G
Washer 2
G
Bolt [brake hose cover (M8)] 3
G
16 Nm (1.6 m · kg, 11 ft · lb)
Bolt [brake hose cover (M6)] 4
G
7 Nm (0.7 m · kg, 5.1 ft · lb)
Rear wheel
1. Install:
Bearing (right) 1
G
Circlip 2
G
Spacer 3
G
Bearing (left) 4
G
Oil seal 5
G
NOTE:
Apply the lithium soap base grease on the
G
bearing and oil seal lip when installing.
Install the bearing with seal facing outward.
G
Use a socket that matches the outside diam-
G
eter of the race of the bearing.
Right side of bearing shall be installed first.
G
Install the oil seal with its manufacture's
G
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
Brake disc 1
G
Bolt (brake disc) 2
G
14 Nm (1.4 m · kg, 10 ft · lb)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
CHAS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz250f

Table of Contents