Yamaha YZ250F(S) Owner's Service Manual page 304

Table of Contents

Advertisement

CAMSHAFTS
Decompression system
1. Check:
Decompression system
G
Checking steps:
Check that the decompression mecha-
G
nism cam 1 moves smoothly.
Check that the decompression mechanism
G
cam lever pin 2 projects from the camshaft.
Timing chain tensioner
1. Check:
While pressing the tensioner rod lightly
G
with fingers, use a thin screwdriver 1
and wind the tensioner rod up fully
clockwise.
When releasing the screwdriver by
G
pressing lightly with fingers, make sure
that the tensioner rod will come out
smoothly.
If not, replace the tensioner assembly.
G
ASSEMBLY AND INSTALLATION
Camshaft
1. Install:
Exhaust camshaft 1
G
Intake camshaft 2
G
Installation steps:
Turn the crankshaft counterclockwise with
G
a wrench.
NOTE:
Apply the molybdenum disulfide oil on the
G
camshafts.
Apply the engine oil on the decompression
G
system.
Squeezing
G
allows the crankshaft to be turned easily.
Align the T.D.C. mark a on the rotor with the
G
align mark b on the crankcase cover when
piston is at T.D.C. on compression stroke.
4 - 26
ENG
the
decompression
lever

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz250f

Table of Contents