Attach Hood and Firebox Assembly to Cabinet Assembly and Install the Regulator Hose Support
Attach the Hood and Firebox Assembly to the front of the Cabinet Side Panels using 2 Phillips Head
Attach the Regulator Hose Support Chain (located on the regulator hose) to the back of the Cabinet
Side Panel using 1 Washer Head Bolt (M4x10mm).
Install Grease Pan Bracket and Grease Pan
Insert the Grease Pan Bracket into the bottom of lower heat shield.
Install the Grease Pan into the Grease Pan Bracket, inserting it from the back of the cabinet.