Download  Print this page

Front Brake Lever - YAMAHA PW50 Owner's Manual

Hide thumbs

Advertisement

1
(b)
(a)
1. Locknut
2. Adjusting screw
3. Tighten the locknut.
1
1. No more than 7 mm (0.28 in)
TIP
The adjusting range of the speed limiter
screw is from the fully turned-in position
to 7 mm (0.28 in) turned out. When the
screw is turned out to 7 mm (0.28 in),
INSTRUMENT AND CONTROL FUNCTIONS
the throttle grip can only be opened ap-
proximately halfway. If more power is
2
required, please consult a Yamaha
dealer.
WARNING
Improper adjustment of the speed
limiter could cause improper throttle
operation. You could lose control,
have an accident or be injured. Do
not turn the adjusting screw out
more than 7 mm (0.28 in) before con-
sulting a Yamaha dealer. Always
make sure the throttle grip free play
is adjusted to 1.5–3.5 mm (0.06–0.14
in). (See page 7-12.)
Power reduction plate
Once the rider can operate with skill at
the top speed permitted by adjusting
the speed limiter alone, the power re-
duction plate can be removed. (See
page 7-7.)

Front brake lever

EWA14631
1. Front brake lever
The front brake lever is located on the
right side of the handlebar. To apply the
front brake, pull this lever toward the
throttle grip.
4-2
EAU12901
1
4

Advertisement

Table of Contents

   Also See for YAMAHA PW50

This manual is also suitable for:

Pw50dPw50d1

Comments to this Manuals

Symbols: 0
Latest comments: