I/O Allocation And Programming; Allocation To The T2 Registers - Toshiba AD268 User Manual

5. I/O Allocation and Programming

5. I/O Allocation and Programming

5.1 Allocation to the T2 registers

The I/O type of the DA264 is "Y 4W".
When the automatic I/O allocation operation is performed with a DA264 mounted on the rack,
the DA264 is allocated as "Y 4W".
The DA264 occupies the 4 consecutive output (YW) registers of the T2.
In this manual, these assigned I/O registers are expressed as YW(n), YW(n+1), YW(n+2) and
YW(n+3).
The following figure shows an example of I/O allocation window of the T-PDS programming
software. In this case, the DA264 is mounted in the slot 0 of base unit BU218.
In the above example, the DA264 is allocated on the unit-0, slot-0. And 4 I/O registers, YW000
to YW003 are assigned to the DA264.
44
Analog I/O Modules (AD268 / DA264 / TC218)
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
PART 2 DA264