Installing Management Agents For Servers For Linux; Configuring The Shared Storage - HP ProLiant DL380 G3 with MSA1000 Setup And Installation Manual

System Setup and Configuration for Red Hat Linux 7.3 Professional

Installing Management Agents for Servers for Linux

For instructions on installing and running Agents for Servers for Linux, refer to
the documentation located at
www.compaq.com/support/files/server/us/WebDoc/550/Linux.pdf

Configuring the Shared Storage

To configure the shared storage:
1. Power on one server and boot from the SmartStart 6.1 (or later) CD.
2. After booting with the SmartStart CD, click the Maintenance tab, then select and
run the Array Configuration Utility.
3. From the Array Configuration Utility Configuration screen, select the Smart
Array Cluster Controller to configure the shared storage hard drives. Refer to
the HP Array Configuration Utility User Guide on the documentation CD for
detailed information.
4. Reboot the server and log in.
Format and mount the shared storage disks.
5.
NOTE: No action is required on the second server at this time.
7-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide