Required Resources; Bracket Hardware - HP Cluster Platform Hardware Kits v2010 Installation Manual

Figure 1-1 Bracket Hardware
• The fasteners that are specified in
Table 1-1 Fasteners (Supplied with Cabinet Mounting Hardware)
Qty. Size
4 M6 cage nuts
4 M6 x 16mm pan
head screws
4 10-32 cage nuts
4 10-32 x 0.625
cap screws
To prevent screws from becoming loose because of vibration, HP recommends that you use
an adjustable torque drive, set to the torque specifications given in the table above. Contact
your HP sales representative if any parts are missing.
Note:
This cable management bracket might also be adaptable for other cable management solutions
(consult your hardware installation documentation).

1.5 Required Resources

To install the HP cable management kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips
— Cage-nut insertion tool (shipped with the rack)
— Marker pen or masking tape
• Other resources: InfiniBand cables (not included in this kit)
Table 1-1.
Format Torque
Square nut N/A
Posidrive 25-30
in/lb
Square nut N/A
Posidrive 25-30
in/lb
Description
Cage nut for M6 screw
Machine screw
Cage nut for 10-32 screw
Machine screw
1.5 Required Resources 7