Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 702

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

C
User Privileges
TABLE 41
Privileges and Application Behavior (Continued)
Privilege
Description
FCIP Management
Allows you to configure
FCIP tunnels and
troubleshooting of IP
interfaces (IP
performance, IP ping and
IP trace route).
FCoE Management
Allows you to configure
FCoE devices.
FICON Management
Allows you to configure
Cascade FICON Fabric
and Cascade FICON
Fabric Merge.
Also allows you to
configure block ports and
allow/prohibit matrix on
active configuration or
any offline configurations.
Firmware Management
Allows you to download
firmware to selected
switches and manage the
firmware repository.
668
No Privilege
Read-Only
Disables the Configure >
Enables the Configure >
FCIP Tunnel and
FCIP Tunnel and
Configure > IP
Configure > IP
Troubleshooting
Troubleshooting
commands. Disables the
commands.
FCIP Tunnel command on
Only enables the Cancel
the Fabric right-click
function for the dialog
menu.
boxes.
Disables the Switch >
Enables the Switch >
FCoE command from the
FCoE command from the
Configure menu.
Configure menu.
Disables all commands
and functions on the
dialog box except the
Close, Cancel, and Help.
Disables the Configure
Disables the Configure
Fabric, Merge Fabrics
Fabric, Merge Fabrics
commands on the
commands on the
Configure > FICON menu.
Configure > FICON menu.
Disables the
Enables the
Allow/Prohibit Matrix
Allow/Prohibit Matrix
command from the
command from the
Configure menu and
Configure menu and
right-click menu.
right-click menu.
Disables all commands
and functions on the
Configure Allow/Prohibit
Matrix dialog box except
the Close and Help.
Disables the Firmware
Enables the Firmware
Management command
Management command
from the Configure menu
from the Configure menu
and right-click menu.
and right-click menu.
Disables all commands
and functions on the
dialog box except the
Close and Help.
Read/Write
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Enables all commands
and functions on the
associated dialog boxes.
Also enables all
commands on the FCIP
Tunnels tab in the
device's Properties dialog
box.
Enables the Switch >
FCoE command from the
Configure menu.
Enables all commands
and functions on the
dialog box.
Enables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Enables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Enables all commands
and functions on the
associated dialog boxes.
Enables the Firmware
Management command
from the Configure menu
and right-click menu.
Enables all commands
and functions on the
dialog box.
DCFM Professional Plus User Manual
53-1001774-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm professional plus

Table of Contents