Removing A Zone From A Zone Configuration; Removing An Offline Device - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20

Removing a zone from a zone configuration

Use the following procedure to remove a zone from a zone configuration. Note that the zone is not
deleted; it is only removed from the zone configuration.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Click the plus sign (+) by the appropriate zone configuration in the Zone Configs list to expand
5. Perform one of the following actions:
6. Click OK or Apply to save your changes.

Removing an offline device

The Management application enables you to remove an offline device from all zones and zone
aliases in the selected zone DB.
1. Select Configure > Zoning > Fabric.
2. Select an FC fabric from the Zoning Scope list.
3. Select Offline Utility from the Zone DB Operation list.
4. Select the check box for the offline device you want to remove in the Remove column.
5. Click OK on the Offline Device Management dialog box.
6. Click OK on the message.
610
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
the listing and show the zone configuration members.
•
Right-click the name of the zone you want to remove in the Zone Configs list and select
Remove.
•
To remove multiple zones, select the zones to be removed from the zone configuration,
and click the left arrow between the Zones list and the Zone Configs list.
When successful, the zone is removed from the Zone Configs list.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Offline Device Management dialog box displays.
Select the Remove check box to select all offline devices.
A warning message displays informing you that the selected zone members will be replaced
from all zones and aliases in the selected zone DB.
DCFM Professional Plus User Manual
53-1001774-01