Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 390

15
Creating a CEE map to carry the LAN and SAN traffic
To create a CEE map to carry the LAN and SAN traffic, complete the following steps.
1. Select Configure > Switch > CEE.
2. Select the switch to edit in the CEE Ports and LAGs table and click Edit.
3. Click the QOS tab.
4. Use
5. Click Close on the CEE Configuration dialog box.
356
The CEE Configuration dialog box displays.
The CEE Edit Switch dialog box displays.
The CEE Edit Switch - QoS tab dialog box displays
FIGURE 107
CEE Edit Switch dialog box - QOS tab
"Creating a CEE map"
shown in the dialog box above.
on page 374 to create a new CEE Map to carry the traffic types, as
DCFM Professional Plus User Manual
53-1001774-01