Configuring Support Data Capture Action; Activating A Policy; Deactivating A Policy - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

10

Configuring support data capture action

You can configure the Management application to start supportSave capture on Fabric OS devices
when a policy is triggered. You can only edit actions from the Add Event Policy, Duplicate Event
Policy, or Edit Event Policy dialog boxes.
For step-by-step instructions on adding or editing an event policy, refer to
on page 257,
on page 259, or
For step-by-step instructions on duplicating an event policy, refer to
on page 265,
crossed policy"
For step-by-step instructions on editing an event policy, refer to
page 269,
page 271, or
To configure the Management application to start supportSave on Fabric OS devices, complete the
following steps.
NOTE
If you select User Action Event or Tech Support Event from the Event Type list, Capture Support Data
(Fabric OS) cannot be configured to start supportSave capture.
1. Select Capture Support Data (Fabric OS) from the Actions list.
2. Click OK on the message.
3. Click OK on the Add, Duplicate, or Edit Event Policy dialog box.

Activating a policy

1. Select Monitor > Event Policies.
2. Select the Active check box for each policy you want to activate.
3. Click OK on the Event Policies dialog box.

Deactivating a policy

1. Select Monitor > Event Policies.
2. Clear the Active check box for each policy you want to deactivate.
3. Click OK on the Event Policies dialog box.
264
"Adding an Port offline policy"
"Adding a security violation policy"
"Duplicating an Port offline policy"
on page 267, or
"Editing an Port offline policy"
"Editing a security violation policy"
Note that capture support data is only triggered for Fabric OS switch events.
The Event Policies dialog box displays.
If the policy actions have not been selected an error message displays. For step-by-step
instructions, refer to "Defining the broadcast message action"
launch script action" on page 262, or
The Event Policies dialog box displays.
on page 258,
on page 260.
on page 266,
"Duplicating a security violation policy"
on page 270, "Editing a PM threshold crossed policy"
on page 272.
"Defining the send e-mail action"
"Adding an event policy"
"Adding a PM threshold crossed policy"
"Duplicating an event policy"
"Duplicating a PM threshold
on page 268.
"Editing an event policy"
on page 261, "Defining the
on page 263.
DCFM Professional Plus User Manual
on
on
53-1001774-01