Configuring The Upload Failure Data Capture Ftp Server - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Configuring the upload failure data capture FTP server

NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
NOTE
Some external FTP software (such as, Filezilla and Xlight) are not supported.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select a device from the Available Switches with Upload Failure Data Capture Enabled table.
3. Click Change FTP Host.
4. Choose one of the following options:
5. Click Test to test the server credentials.
6. Click OK on the Change FTP Host dialog box.
7.
8. Click OK on the confirmation message, if necessary.
DCFM Professional Plus User Manual
53-1001774-01
The Upload Failure Data Capture dialog box displays.
The Change FTP Server dialog box displays.
FIGURE 86
Change FTP Server dialog box
•
Select the Use Management_Application option to use the Management application FTP
server.
•
Select the Custom option and complete the following steps to configure a FTP server for
the selected device.
a. Enter the server's IP address in the Host IP field.
c. Enter a user name for the server in the User Name field.
d. Enter a password for the server in the Password field.
e. Enter the path to where the trace dump data is saved in the Directory Path field.
Click OK on the Upload Failure Data Capture dialog box.
8
235