8
Disabling upload failure data capture
NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select one or more devices on which you want to disable automatic trace dump from the
3. Click the left arrow button.
4. Click OK on the Upload Failure Data Capture dialog box.
5. Click OK on the confirmation message, if necessary.
Purging upload failure data capture files
NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select the Purge Upload Failure Data Capture Files check box to enable purging the trace
3. Select how often (days) you want to purge the trace dump data from the Purge Upload Failure
4. Click OK on the Upload Failure Data Capture dialog box.
234
The Upload Failure Data Capture dialog box displays.
Available Switches with Upload Failure Data Capture Enabled table.
The selected devices move from the Switches with Upload Failure Data Capture Enabled table
to the Available Switches with Upload Failure Data Capture Disabled table.
The Upload Failure Data Capture dialog box displays.
dump files.
Data Capture Files list.
DCFM Professional Plus User Manual
53-1001774-01