Launching An Element Manager; Launching Web Tools - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Launching an Element Manager

Element Managers are used to manage Fibre Channel switches and directors. You can open a
device's Element Manager directly from the application.
To launch a device's Element Manager, complete the following steps.
On the Connectivity Map, double-click the device you want to manage.
The Element Manager displays.
OR
On the Connectivity Map, right-click the device you want to manage and select Element Manager >
Hardware.
The Element Manager displays.
OR
1. Select a device.
2. Select Configure > Element Manager > Hardware.
OR
1. Select a device.
2. Click the Element Manager icon on the toolbar.

Launching Web Tools

Use Brocade Web Tools to enable and manage Brocade Access Gateway, Switches, and Directors.
You can open Web Tools directly from the application. For more information about Web Tools, refer
to the Brocade Web Tools Administrator's Guide. For more information about Brocade Access
Gateway, Switches, and Directors, refer to the documentation for the specific device.
To launch a device's Element Manager, complete the following steps.
NOTE
You must have Device Administration privileges for the selected device to launch Web Tools. If you
do not have Device Administration privileges, you will need to enter those credentials to launch Web
Tools.
On the Connectivity Map, double-click the Fabric OS device you want to manage.
Web Tools displays.
OR
On the Connectivity Map, right-click the Fabric OS device you want to manage and select Element
Manager > Hardware.
Web Tools displays.
OR
DCFM Professional Plus User Manual
53-1001774-01
The Element Manager displays.
The Element Manager displays.
6
143