Reverting To The Default Background Color - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

5
2. Select the Custom option and click Change.
FIGURE 59
3. Select or specify a color and preview it in the Preview pane.
4. Click OK to change the background color, or click Reset to return all settings to the color
5. Click OK on the Map Display Properties dialog box.

Reverting to the default background color

You can revert back to the default background color.
1. Right-click a group and select Map Display.
2. Select the Default option.
3. Click OK on the Map Display Properties dialog box.
130
The Choose a background color dialog box displays
Map Display dialog box
To pick a color from a swatch, select the Swatches tab. Select a color from the display.
To specify a color based on hue, saturation, and brightness, click the HSB tab. Specify
the hue (0 to 359 degrees), saturation (0 to 100%) and brightness (0 to 100%).
To specify a color based on values of red, green, and blue, click the RGB tab. Specify
the values for red, green, and blue (0 to 255).
currently being displayed on the topology.
The Map Display Properties dialog box displays.
(Figure
59).
DCFM Professional Plus User Manual
53-1001774-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm professional plus

Table of Contents