Hiding a call home center
NOTE
Before you can hide a call home center, you must remove all assigned products.
To hide a call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Click Show/Hide Centers (beneath the Call Home Centers table).
3. Clear the check boxes of the call home centers you want to hide and click OK.
Editing a call home center
NOTE
Call Home is supported on Windows systems for all modem call home centers and is supported on
Linux and Solaris for the E-mail call home centers.
To edit a call home center, select from the following procedures:
Editing the Brocade International or IBM call home center
To edit a Brocade International or IBM call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the call home center you want to edit (Brocade International or IBM) in the Call Home
3. Click Edit Centers (beneath the Call Home Centers table).
DCFM Professional Plus User Manual
53-1001774-01
The Call Home dialog box displays.
The Centers dialog box displays with a predefined list of call home centers.
The Call Home dialog box displays with only selected call home centers listed in the Call Home
Centers table.
•
Editing the Brocade International or IBM call home center . . . . . . . . . . . . .109
•
Editing the Brocade North America call home center. . . . . . . . . . . . . . . . . .111
•
Editing an E-mail call home center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
•
Editing the EMC call home center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
•
Editing the HP LAN call home center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
The Call Home dialog box displays.
Centers table.
The Configure Call Home Center dialog box displays
(Figure
48).
4
109