Server Port - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Server port

You can configure the server port settings so that you can assign a web server port number and set
the server port to be SSL-enabled.
Configuring the server port
To configure server settings, complete the following steps.
1. Select Server > Options.
FIGURE 44
2. Select Server Port in the Category list.
3. Select the Enable SSL check box to enable this function for the server port.
4. Enter a port number in the Web Server Port # field.
5. Enter a port number in the Starting Port # field.
DCFM Professional Plus User Manual
53-1001774-01
The Options dialog box displays
Options dialog box (Server Port option)
NOTE
Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.
The server requires 13 consecutive free ports beginning with the starting port number.
(Figure 44).
3
99