3
5. Click Search.
6. Click OK to close the Configure Names dialog box.
Searching for a device by WWN
You can search for objects (switch, fabric, product, ports, or N Ports) by WWN (world wide name). To
search for a name in the Connectivity Map, refer to
on page 139.
To search by WWN, complete the following steps.
1. Select Configure > Names.
2. Select All Names from the Display list.
3. Select WWN from the Scope list.
4. Enter the WWN you want to search for in the Search field.
5. Click Search.
6. Click OK to close the Configure Names dialog box.
82
All devices with the specified name (or partial name) are highlighted in the Display table. You
may need to scroll to see all highlighted names.
The Configure Names dialog box displays.
You can search on partial WWNs.
NOTE
To search for a device, the device must be discovered and display in the topology.
All devices with the specified WWN (or partial WWN) are highlighted in the Display table. You
may need to scroll to see all highlighted WWNs.
"Searching for a device in the connectivity map"
DCFM Professional Plus User Manual
53-1001774-01