'The name of the Encryption Group used to initialize
the card. For recovery set cards, this identifies which
group's master key is backed up on the card.
The date and time that the card was initialized. For
recovery set cards, this is the date and time the
master key was written to the card.
Foreign key reference to both the VIRTUAL_SWITCH
table and the CRYPTO_SWITCH table (both switch
tables use the same primary key values). Identifies
the switch that contains this encryption engine.
For chassis switches, the slot or blade that contains
the encryption engine. Always 0 for switches with a
single embedded encryption engine.
Not used. Previously used to indicate the engine's
operational status. Replaced by EE_STATE.
Foreign key reference to an HA_CLUSTER record.
Identifies the HA Cluster that this engine belongs to.
Null if this engine does not belong to an HA Cluster.
Foreign key reference to the SMART_CARD record
that identifies the System Card required to enable
this engine. Null if no System Card has been
registered yet. This feature is not yet supported.
Indicates whether a System Card is currently inserted
in the Encryption Engine, and whether the card is
valid or not. This feature is not yet supported.
Not used. Previously used to indicate the number of
WWN pools remaining for allocation on this
encryption engine. This feature is no longer
Administrative state for this engine:
0 = disabled
1 = enabled
The public key certificate, in PEM format, for the
Security Processor within the Encryption Engine.
Used to create link keys for NetApp LKM key vaults.
The operational status of this Encryption Engine. For
possible values, see the enum definition in the DTO
DCFM Enterprise User Manual