Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 804

D
Encryption Device
TABLE 134
Field
TAPE_POOL_NAME
TAPE_POOL_OPERATION_M
ODE
TAPE_POOL_POLICY
KEY_EXPIRATION
TAPE_POOL_LABEL_TYPE
TABLE 135
Field
ID*
ENCRYPTION_GROUP_ID
SMART_CARD_ID
POSITION
TABLE 136
Field
ID*
ENCRYPTION_GROUP_ID
MEMBER_IP_ADDRESS
MEMBER_WWN
MEMBER_STATUS
766
ENCRYPTION_TAPE_POOL
Definition
User-supplied name or number for the tape pool. This
is the same name or number specified in the tape
backup application. Numbers are stored in hex.
Specifies which type of encryption should be used by
tape volumes in this tape pool.
0 = Native
1 = DF-compatible.
Specifies whether tape volumes in this tape pool
should be encrypted.
0 = encrypted
1 = cleartext
Number of days each data encryption key for this
tape pool should be used. After the configured
number of days, a new data encryption key is
automatically generated for any further tape volumes
in this pool. 0 = no expiration.
Indicates whether the TAPE_POOL_NAME field is a
name or a number.
0 = name
1 = number
RECOVERY_CARD_GROUP_MAPPING
Definition
Foreign key reference to the ENCRYPTION_GROUP for
which a recovery card is registered.
Foreign key reference to the SMART_CARD that is
registered as a recovery card for the encryption
group.
The position of the card within the recovery card set.
1 = first card, 2 = second card, etc.
ENCRYPTION_GROUP_MEMBER
Definition
Foreign key reference to the ENCRYPTION_GROUP
record that identifies the encryption group that this
member switch belongs to.
The management IP address (IPv4, IPv6, or
hostname) of the member switch.
The Node WWN of the member switch.
The reachability status of the member switch as seen
by the group leader switch. For possible values see
the enum definition in the DTO class.
Format Size
varchar 64
smallint
smallint
int
smallint
Format Size
int
int
int
int
Format Size
int
int
varchar 128
char 23
smallint
DCFM Enterprise User Manual
53-1001775-01