Client Browser Troubleshooting; Fabric Tracking Troubleshooting - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

7.
8. Click Cancel on the IP Performance dialog box.

Client browser troubleshooting

The following section states a possible issue and the recommended solution for client browser
errors.
Problem
Downloading Client from a Internet Explorer
Browser over HTTPS

Fabric tracking troubleshooting

The following section states a possible issue and the recommended solution for fabric tracking
errors.
Problem
If a switch is replaced by another switch having
the same IP address but a different node WWN
while fabric tracking is on, the Management
application does not update the Product List,
Connectivity Map or switch properties with the
new node WWN.
DCFM Enterprise User Manual
53-1001775-01
Field/Component
Description
DELAY
The average round trip time to send a packet of data and receive the
acknowledgement.
PMTU
The largest packet size that can be transmitted over the end-to- end path without
fragmentation. This value is measured in bytes and includes the IP header and
(Path Maximum
payload. IP Performance tries the configured Fabric OS Jumbo MTU value (anything
Transmission Unit)
over 15000, then 1500, then 1260. The value displayed in the table is the largest
value that worked.
Click Close on the IP Performance Result dialog box.
Resolution
If the JNLP file does not launch automatically, use one of the following options:
Complete the following steps.
1
2
In Internet Explorer 7, complete the following steps.
1
2
3
If the browser warns you about the security certificate, use the fully qualified hostname to
launch the web page.
Resolution
Choose from one of the following options:
Turn fabric tracking off while the switch is replaced. This causes the old switch to be
removed and the new switch added.
After the switch is replaced, remove and re-add the fabric in the Discover Setup
dialog box.
Save the JNLP file to the local host.
Launch the JNLP file manually.
Select Tools > Internet Options.
Click the Advanced tab.
Clear the Do not save encrypted pages to disk check box.
Client browser troubleshooting
23
663

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm enterprise

Table of Contents