Replacing An Offline Device By Name - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Replacing an offline device by name

The Management application enables you to replace an offline device by name from all zones and
zone aliases in the selected zone DB.
1. Select Configure > Zoning > Fabric.
2. Select an FC fabric from the Zoning Scope list.
3. Select Offline Utility from the Zone DB Operation list.
4. Make sure the Remove column check box, for the offline device you want to replace, is clear.
5. Select Name (default is WWN) in the corresponding Replace Using list.
6. Select the name of the offline device in the corresponding Replace Using list.
7.
8. Click OK on the Offline Device Management dialog box.
9. Click OK on the message.
10. Click OK or Apply on the Zoning dialog box to save your changes.
DCFM Enterprise User Manual
53-1001775-01
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Offline Device Management dialog box displays.
If the selected name has multiple device or device port WWNs assigned (names are set to
non-unique in Management application), the Device or Device Port WWN of Non-unique Name
dialog box displays. The WWN list includes all device and device port WWNs assigned to the
selected name.
Select the WWN you want to use from the WWN list and click OK.
A warning message displays informing you that the selected zone members will be removed
from all zones and aliases in the selected zone DB.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Replacing an offline device by name
22
653