Feature-To-Firmware Requirements - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8. Go to the Install_Home/conf directory.
9. Open the version.properties file in a text editor.
10. Change the patch version (patch.version) value to the reverted patch (for example, if you are
11. Go to the Install_Home/patch-backup/conf directory.
12. Copy the patch.conf file in this directory to the Install_Home/conf directory.
13. Start all services by completing the following steps.

Feature-to-firmware requirements

Use the following table to determine whether the Management application features are only
available with a specific version of the Fabric OS firmware, M-EOS firmware, or both, as well as if
there are specific licensing requirements.
Feature
Access Gateway (AG)
Call Home
Discovery
Encryption
Enhanced Group Management
Fault Management
Fabric Binding
FCIP Management
DCFM Enterprise User Manual
53-1001775-01
reverting from patch F to patch C then
If the previous version is the initial version (no patches), change the patch version value to
none (for example,
patch.version = None
If the previous version is the initial version (no patches), delete the patch.conf file in the
Install_Home/conf directory.
a. Launch the Server Console.
b. Click the Services tab.
c. Click Start to start all services.
Fabric OS
AG connected to Fabric OS devices requires
firmware 6.1.1 or later.
Requires Fabric OS 5.2 or later for supportSave.
Requires Fabric Watch license for SNMP traps.
Requires Fabric OS 5.0 or later for the seed switch
in a pure Fabric OS fabric.
Requires Fabric OS 6.0 or later for the seed switch
in a mixed Fabric OS and M-EOS fabric.
Requires Fabric OS 6.1.1_enc.
Requires Enhanced Group Management license.
Requires Fabric OS 4.4 or later for SNMP traps
Requires Fabric OS 5.2 or later in a pure Fabric OS
fabric.
Requires Fabric OS 6.0 or later in a mixed
Fabric OS and M-EOS fabric.
Requires Fabric OS 5.1 or later to modify.
Requires Fabric OS 5.3 or later for FCIP tunnels.
Requires FCIP license.
Requires Fabric OS 6.0 or later to enable the
FICON Emulation tab on the FCIP Tunnel
Advanced Settings dialog box.

Feature-to-firmware requirements

).
patch.version = c
).
M-EOS
AG connected to M-EOS devices requires firmware
9.9.2 or later.
Requires M-EOS and M-EOSn 9.6.X or later.
Requires M-EOS 9.9.2 or later for the seed switch
in a pure M-EOS fabric.
Requires M-EOS and M-EOSn 9.6.X or later for
discovery.
Not available.
Not available.
Requires M-EOS and M-EOSn 9.6.X or later.
Requires M-EOS and M-EOSn 9.6.X or later.
Not available.
1
29