Saving A Master Key To A Key Vault - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20

Saving a master key to a key vault

Saving a master key to a key vault
Use the following procedure to save the master key to a key vault.
1. Select Configure > Encryption from the menu bar.
2. Select an encryption group from the tree, and click Properties.
3. Select the Security tab.
4. Select Backup Master Key as the Master Key Action.
FIGURE 250
5. Select Key Vault as the Backup Destination.
6. Enter the passphrase, which is required for restoring the master key. The passphrase can be
7.
8. Click OK.
9. Store both the Key ID and the passphrase in a secure place. Both will be required to restore the
10. Click OK after you have copied the key ID.
562
The Encryption Center dialog box displays.
The Backup Master Key for Encryption Group dialog box displays.
Backup Destination (to key vault) dialog box
between eight and 40 characters, and any character is allowed.
Re-type the passphrase for verification.
A dialog box displays that shows the Key ID.
master key in the future. (The Key ID identifies the storage location in the key vault.)
DCFM Enterprise User Manual
53-1001775-01