Viewing virtual FCoE ports
Configuration of virtual FCoE ports requires installation of the FCoE license on the switch.
1. Select Configure > Switch > FCoE from the menu bar.
2. Select the Virtual FCoE Ports tab.
FIGURE 194
3. Select one or more virtual ports from the Products/Ports list.
4. Perform one of the following tasks:
5. Click Close to close the dialog box.
DCFM Enterprise User Manual
53-1001775-01
The FCoE Configuration dialog box displays.
The Virtual FCoE Ports tab displays.
Virtual FCoE Ports dialog box
•
Click Enable to enable a selected virtual FCoE port for CEE configuration.
•
Click Disable to disable a selected virtual FCoE port from CEE configuration.
•
Click Connected Devices to view a list of FCoE virtual ports and to what they are directly
connected.
Viewing virtual FCoE ports
17
465