Creating A Traffic Class Map; Editing A Traffic Class Map - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual
Supporting dcfm 10.4.x
Hide thumbs
Also See for Brocade BladeSystem 4/24:
- User manual (830 pages) ,
- Command reference manual (894 pages) ,
- Documentation update (271 pages)
Table of Contents
Advertisement
17
Creating a traffic class map
Creating a traffic class map
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select Traffic Class from the Map Type list.
5. Name the Traffic Class map.
6. Click the Traffic Class cell in a CoS row and directly enter a value from 0-7. You can leave the
7.
8. Click OK if the Traffic Class map does not already exist.
9. Review the changes carefully before you accept them.
10. Click Start to apply the changes, or click Close to abort the operation.
Editing a traffic class map
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a Traffic Class Map from the Traffic Class Maps table, and click the left arrow button to
5. Keep the same Traffic Class Map name and modify the values, as required.
6. Click the right arrow button to re-add the map to the Traffic Class Maps table.
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
442
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
cell empty to indicate zero (0).
Click the right arrow button to add the map to the Traffic Class Maps table.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
The CEE Confirmation and Status dialog box displays.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
load its values to the left pane. The fields are now editable.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
Click OK.
The CEE Confirmation and Status dialog box displays.
DCFM Enterprise User Manual
53-1001775-01
Advertisement
Chapters
Table of Contents
Troubleshooting
