Creating A Cee Map - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

17

Creating a CEE map

Creating a CEE map
When you create a CEE map, each of the Class of Service (CoS) options (0-7) must be mapped to at
least one of the Priority Group IDs (0-7) and the total bandwidth must equal 100. All QoS, CEE map,
and Traffic map configurations apply to all ports in a LAG.
There can be, at the most, 16 entries in the Priority Group table. Eight of the entries are Strict
Priority entries with a Priority Group ID of 15.0 to 15.7 and eight are user-definable entries with a
Priority Group ID of 0-7. See
NOTE
The 10 Gbps CEE/FC switch module can have only one CEE map.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
FIGURE 181
4. Select CEE from the Map Type list.
438
Table
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
QoS, Create CEE Map dialog box
for an example of priority group configuration.
DCFM Enterprise User Manual
53-1001775-01