CEE configuration tasks
The CEE Configuration dialog box enables you to perform the following tasks:
•
•
•
•
Instructions for performing the CEE configuration tasks shown in
following sections:
•
•
•
•
•
•
DCFM Enterprise User Manual
53-1001775-01
Edit CEE ports for a selected switch. You can also add a link aggregation group (LAG) if a single
switch is selected.
Edit a switch or port and configure the following CEE policies:
NOTE
Access Control List and Spanning Tree Protocol can also be set at the LAG level.
•
QoS
•
LLDP-DCBX
•
Access Control List
•
Spanning Tree Protocol
•
802.1x
Enable or disable a LAG or CEE port.
Display performance statistics for CEE ports.
"Link aggregation groups"
"QoS configuration"
on page 437
"LLDP-DCBX configuration"
"Access Control List configuration"
"Spanning Tree Protocol configuration"
"802.1x authentication"
on page 460
on page 427
on page 445
on page 450
on page 455
CEE configuration tasks
Figure 172
are detailed in the
17
421