Deleting Fcip Tunnels; Disabling Fcip Circuits; Enabling Fcip Circuits; Deleting Fcip Circuits - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

16

Deleting FCIP tunnels

Deleting FCIP tunnels
1. From the FCIP Tunnels dialog box, right-click the tunnel you want to delete.
2. Select the Delete Tunnel button.
3. Click OK to delete the tunnel.

Disabling FCIP circuits

1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Disable Circuit.
5. Click OK to disable the circuit.

Enabling FCIP circuits

1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Enable Circuit.
5. Click OK to enable the circuit.

Deleting FCIP Circuits

1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Delete Circuit.
5. Click OK to delete the circuit.
408
A confirmation dialog box displays, warning you of the consequences of deleting a tunnel.
A confirmation dialog box displays.
A confirmation dialog box displays.
A confirmation dialog box displays, warning you of the consequences of deleting a circuit.
DCFM Enterprise User Manual
53-1001775-01