Editing A Security Threshold - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

6. Edit the number of state changes allowed for the threshold in the Threshold errors field, if
7.
8. Click OK to add the state change threshold to the table and close the Edit State Change
9. Click OK on the Port Fencing dialog box.

Editing a Security threshold

NOTE
This threshold is only available for M-EOS devices.
To edit a Security threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select Security from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
DCFM Enterprise User Manual
53-1001775-01
necessary.
Change the time period for the threshold from the errors per list, if necessary. The following
choices are available:
None—the port is blocked as soon as the specified number of invalid CRCs allowed is met.
Second—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a second.
Minute—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a minute.
Hour—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a hour.
Day—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 339.
The Port Fencing dialog box displays.
The Edit Security Threshold dialog box displays.
FIGURE 141
Edit Security Threshold dialog box
Editing a Security threshold
"Assigning thresholds"
13
on
347

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm enterprise

Table of Contents