13
Editing a State Change threshold
Editing a State Change threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To edit an State Change threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select State Change (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
346
The Port Fencing dialog box displays
FIGURE 139
Port Fencing dialog box
The Edit State Change Threshold dialog box displays.
FIGURE 140
Edit State Change Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
(Figure
124).
step
8.
step
6.
DCFM Enterprise User Manual
53-1001775-01