Deleting A Policy; Duplicating An Event Policy - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

10

Deleting a policy

Deleting a policy
1. Select Monitor > Event Policies.
2. Select the policy you want to delete.
3. Click Delete.
4. Click OK on the Event Policies dialog box.

Duplicating an event policy

To duplicate an event policy, complete the following steps.
1. Select Monitor > Event Policies.
2. Select the policy you want to duplicate in the Policies table.
3. Click Duplicate.
4. Enter a name (255 characters maximum) for the policy in the Name field.
5. Edit the description (255 characters maximum) for the policy in the Description field.
6. Change the event type by selecting an event type from the Event Type list.
7.
8. Edit the event description text (255 characters maximum) in the Description Contains field.
9. Edit the message ID associated with SNMP traps and Syslog messages in the Message ID field.
266
The Event Policies dialog box displays.
Press Ctrl and then click to select more than one policy.
The Event Policies dialog box displays.
The Duplicate Event Policy dialog box displays.
Policy names must be unique; however, they are case insensitive.
For a list of event types, refer to
Change the event level by selecting an event level from the Event Level list.
This entry can be from the start, middle, or end of the event description. If the entry matches or
is part of the event description, the policy is triggered.
If the entry matches or is part of the message ID, the policy is triggered.
"Event types"
on page 257.
DCFM Enterprise User Manual
53-1001775-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm enterprise

Table of Contents